Why is Sealcoating important for Driveways?

Hey there, are you tired of your parking lot looking like a warzone? Well, fear not my friend, because the Palo Alto Sealcoating is here to save the day! Our blacktop sealcoating Menlo Park services will have your parking lot looking fresh and new in no time.

Why should you bother with sealcoating, you ask? Well, let me tell you, your parking lot takes a beating from all sides – the sun, snow, salt, spills, and don’t forget those pesky vehicles! Regularly sealcoating your lot can help minimize damage and deterioration while keeping it looking sharp. And by protecting your asphalt from moisture seeping down into cracks, you’ll prevent the need for more significant and costly repairs down the line.

Are you considering maintenance with sealcoating?

You betcha! Here at El Camino General Engineering, we’ve got it all covered. We recommend sealing your lot within a year of it being laid down and then every 2-3 years after that. Plus, we offer other maintenance services like crack sealing, infrared repair, and repair patching. We’re like the Avengers of parking lot maintenance!

So what’s our sealcoat made of, you ask?

We custom-make our sealcoat for your specific parking lot because every lot is unique. Our team use either coal-tar emulsion or asphalt-based emulsion, and we add sand to increase solids and minimize liability in case of slips and falls. We can also add an acrylic-based hardening additive or polymer-modified material for extra strength and longevity.

Now, you may be wondering how we apply the sealcoat. We use either a squeegee or spray method, depending on the condition of your asphalt. Sometimes, we even use both methods to ensure full coverage. You can check out our skilled sealcoating company contractors at work by watching our video.

Palo Alto Seal Coating Company right for you?

Before we get started on your lot, we need to make sure all structural repairs are completed and that at least 12 months have passed since the repairs were done. We’ll need access to all areas that need to be sealed, including locked or gated areas, and sprinklers will need to be shut off. And don’t worry, we’ll clean everything up with mechanical blowers and brooms or a sweeper truck before we start.

But when can we actually apply the sealcoat? The weather has to be just right – the air and pavement temperature should be at least 55 degrees Fahrenheit while we apply the sealer and for the following 8 hours. And after we’re done, you’ll need to keep your lot off-limits to traffic for at least 24 hours.

But don’t worry, we know you’ve got a business to run. We can perform the sealcoating in off-peak hours or in several separate sessions to accommodate your schedule. Just remember not to hose down, wash, or use sprinklers on your lot for 48 hours before and after the work is done.

And if you’re wondering if the sealcoat will cover stains and oil spots on your asphalt, the answer is most likely yes. We treat severely stained areas before applying the coating, but if the damage is excessive, we can perform repairs before sealcoating.

So there you have it, folks – sealcoating made easy by the Palo Alto Seal Coating Company . Got more questions? Contact us today and we’ll break it down for you even further.

The post Why is Sealcoating important for Driveways? appeared first on EL CAMINO GENERAL ENGINEERING INC.